VANCO

Allows for Multiple Bulk Cables to be Organized for Professional Installations Fits on a Single or Dual Gang Electrical J-Box or Low Voltage Mounting Box Easy Installation Trim Plate and...

Allows for Multiple Bulk Cables to be Organized for Professional Installations Fits on a Single or Dual Gang Electrical J-Box or Low Voltage Mounting Box Easy Installation Trim Plate and...

TV signal bi-directional combiner that works for antenna and coaxial signals, as well as digital signals 1 GHz bandwidth 3.5 dB insertion loss Passes DC RF signals

TV signal bi-directional combiner that works for antenna and coaxial signals, as well as digital signals 1 GHz bandwidth 3.5 dB insertion loss Passes DC RF signals

TV signal bi-directional combiner that works for antenna and coaxial signals, as well as digital signals 1 GHz bandwidth 3.5 dB insertion loss Passes DC RF signals

Converts Coaxial or Toslink digital audio signals to analog L/R Audio Supports sampling rate at 32- 44.1- 48- and 96 KHz 24-bit S/PDIF incoming bit stream on left and right channels Provides...

Converts coaxial or Toslink digital audio signals to analog L/R audio Select toggle switch is used to choose Coaxial or Toslink as the input 24-bit S/PDIF incoming bit stream on left and right...

Transmission Range: Up to 600 meters (1968 ft) Switch allows for choice between stereo audio or mini stereo audio by dip switch Audio Input: Dual gold-plated RCA female jacks or 3.5mm stereo...

IR Receiver works in most lighting environments- including CFL A total of 6 IR Emitters can be supported IR Receive Frequency: 34 kHz to 60 kHz IR Transmit Frequencies: 38 kHz & 56 kHz Range: 40 ft...

IR Receive Frequency: 34 kHz to 60 kHz IR Transmit Frequencies: 38 kHz & 56 kHz Range: 40 ft at 38 kHz & 25 ft at 56 kHz Compatible with Vanco IR Shield (Part # 280749-10)

IR Receive Frequency: 34 kHz to 60 kHz IR Transmit Frequencies: 38 kHz & 56 kHz Range: 40 ft at 38 kHz & 25 ft at 56 kHz Compatible with Vanco IR Shield (Part # 280749-10)

Ideal for Use with Digital Satellite Systems 2-Way- 2.4 GHz- 5-2150 MHz Terminals are Standard “F” 75 Ohm Connectors Mounting Tabs and Screws Included