LOWELL MANUFACTURING
LOWELL MANUFACTURING SVP-2 Rack Panel-Vented-2u, 18ga Flanged Perforated Steel, Blk SVP-2
- UPC:
- 811405035036
- MPN:
- SVP-2
- Shipping:
- Calculated at Checkout
Description
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
View AllClose
Related Products
Related Products
LOWELL MANUFACTURING SVP-1 Rack Panel-Vented-1u, 18ga Flanged Perforated Steel, Blk SVP-1
LOWELL MANUFACTURING
MSRP:
$26.60
$23.41
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Small Holes: 0.0781 in. diameter on 0.125 in. staggered centers
Open Area: 35 percent
Width: 19 in.
LOWELL MANUFACTURING SEP-2 Rack Panel-Blank-2u, 18-Gauge Flanged Steel, Blk SEP-2
LOWELL MANUFACTURING
MSRP:
$21.40
$18.83
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
Width: 19 in.
Height: 1/3U–6U
Made in USA
LOWELL MANUFACTURING LVC8P-ID-2 Rack Panel For Volume Controls-2u, Blk LVC8P-ID-2
LOWELL MANUFACTURING
MSRP:
$64.20
$56.50
16-gauge steel
PocketID™ polycarbonate window for paper label (not included)
Eight (8) punches for volume controls. Accepts up to 8 standard volume controls (or 4 wide body in alternate...
LOWELL MANUFACTURING VR-2 Rack-Vertical Hold, 2u VR-2
LOWELL MANUFACTURING
MSRP:
$136.00
$119.68
16-gauge steel
Mount to wall or desk
Holds equipment vertically or horizontally
One-pair mounting rails tapped 10-32
Two rear obrounds for cable management
Pilot Point screws with captive...
LOWELL MANUFACTURING USV-214 Rack Utility Shelf-Vented, 2u, 14in D, Blk USV-214
LOWELL MANUFACTURING
MSRP:
$103.20
$90.82
16-gauge steel with fully vented base
Smooth black
Front Flange: 0.375 in.
Rear Flange: 0.562 in.
Slotted rear flange (0.56") provides tie-off points for cable management and notches to mount an...
LOWELL MANUFACTURING SEP-3 Rack Panel-Blank-3u, 18-Gauge Flanged Steel, Blk SEP-3
LOWELL MANUFACTURING
MSRP:
$24.40
$21.47
Material: 18-gauge steel
Finish: Smooth black semi-gloss
Flange: 0.625 in.
LOWELL MANUFACTURING SEP-1 Rack Panel-Blank-1u, 18-Gauge Flanged Steel, Blk SEP-1
LOWELL MANUFACTURING
MSRP:
$15.80
$13.90
Blank panel for 19" E.I.A. racks is 18-gauge steel with flange
for strength and rigidity.
18-gauge certified U.S. steel
Smooth black semi-gloss powder epoxy finish
0.625" flange
LOWELL MANUFACTURING US-214 Rack Utility Shelf-2u, 14in D, Blk US-214
LOWELL MANUFACTURING
MSRP:
$100.80
$88.70
Material: 16-gauge steel
Finish: Smooth black
Front and rear flanges
LOWELL MANUFACTURING USV-110 Rack Utility Shelf-Vented, 1u, 10in D, Blk USV-110
LOWELL MANUFACTURING
MSRP:
$78.20
$68.82
16-gauge steel with fully vented base
Smooth black
Front Flange: 0.375 in.
Rear Flange: 0.562 in.
Slotted rear flange (0.56") provides tie-off points for cable management and notches to mount an...